EGM-100 epoxy grout including A (resin), B (hardener), C (filler) three components, the product is made of high quality resin and refined packing, 100% solids, non-harmful solvents volatiles. The room temperature can be thoroughly mixed using a three-component material contained in each group after without adding additional ingredients. First, the product features a high-strength, early strength: it can provide much better than the mechanical properties of cement-based materials, compression, adhesion, etc., higher early strength. 2, low exothermic peak: provides up to 120 minutes (25 ℃) of operating time, suitable for large volume use grout 3, no shrinkage: Ensure that the final shape after filling layer in full contact with the bearing surface to ensure the installation of high-precision equipment degrees. 4, excellent creep resistance: Epoxy grout can be long at -50 ℃ to + 80 ℃ alternately freezing and thawing, pressure vibration in harsh physical conditions of long-term use without plastic deformation, to ensure long-term accurate positioning devices. 5, excellent toughness: Epoxy grout can be resolved by moving the device to deliver any cement-based grout layer may burst dynamic load. 6, corrosion resistance: can withstand acid, alkali, salt, oil and other chemicals, long-term exposure to corrosion. Second, the application range of a secondary grout installation of compressors, pumps, punching machine, grinder, ball mill, high shock resistance of the device. 2, susceptible to chemical attack of equipment foundation grouting area. 3, rail infrastructure, bridges and other supporting base area by the strong pressure grouting. 4, anchors, reinforced concrete structure planting and building reinforcement. 5, concrete, stone, steel, wood and other surfaces as a self-leveling mortar use. 6, iron, iron rods, steel connecting rod. Third, the performance indicators of the physical properties of the product range (A + B): C≈1: 4 (conforming to ASTM standards) Physical Performance Standards 1 day 3 days 7 days ultimate compressive strength of GB / T50081-2002> 50MPa> 65MPa> 95MPa> 100MPa flexural strength GB / T50081-2002> 10MPa> 15MPa> 20MPa> 25MPa pullout strength of GB / T50081-2002> 8MPa> 12MPa> 15MPa> 17MPa pressure bomb film GB / T50081-2002 / /> 18000MPa> 18500MPa linear shrinkage Rate HG / T2625-94 / / <0.012% <0.012% exothermic peak HG / T2625-94 <42 ℃ compression creep GBJ82-85 <1.0 * 10-3mm / mm (180 days) the thermal expansion coefficient GBJ119-88 < 40 * 10-6mm / mm / ℃ (forming 28 days, 0-60 ℃ range test) Note: 1, preheating, molding and curing at 23 ± 2 ℃, relative humidity of 50 ± 5% under the experimental conditions, other conditions accordance with the appropriate standards. 2, final data at 23 ± 2 ℃ molding and curing for 7 days, then accelerated curing at 60 ℃ 6 hours measured. Fourth, a storage package, epoxy grout at room temperature and dry conditions can be stored for at least 18 months. 2, according to the packaging mix A: B: C = 25: 10: 150