CGM a base slurry, the product features CGM seat cement slurry is a kind of cementing material, with high-strength composite admixture and aggregate, you can use the site after mixing with water, with no shrinkage, high strength, easy construction and other characteristics Private housing stock, for a variety of devices slurry seat pad. Second, the scope 1.CGM seat slurry mainly used seat installation engineering pulp London and a concrete pad construction. Technical performance 2.CGM seat pulp strength and expansion rate and other technical indicators are as follows: compressive strength (MPa) expansion rate (%) 1 day ≥30 ≥0.02 3 天 天 ≥65 ≥50 28 Third, the use of the base 1. surface roughening, uneven surface height should be controlled in more than 2cm. The surface should handle clean, there should be oil, floating dust and loose concrete, Block 1 hour before watering wet pulp should base surface, the seat surface water slurry should initially cleared. According to plate size and seat height pulp production trapezoid motif. 2. When mixing the slurry using manual or mechanical stirring range according to the factory to provide water, must be uniform. 3. When the stirred slurry can shape into dough can be used when the stirred slurry injection seat in place of the mold body, should be pouring layered tamping thickness of each layer should be controlled at about 50mm, slurry surface shape should be low in the middle surrounded by high arc, in favor of placing the pad when removing air. 4. When the seat back surface of the slurry water stains disappear (depending on the construction environment temperature) to place the plate and measuring elevation, base plate is placed on the application of hand pressed pulp with a wooden hammer percussion pad surface, it steady decline, while knocking can not hit the ramp. After backing down to a predetermined level to stop knocking, review the pad level again. 5. straw bags and other items covering water conservation can not shock and vibration during maintenance.